Currently listing 182 articles in 15 categories!

Latest Articles
You need flash installed to view this header!
Steps to Firing a kiln with no electronic controller (basic process): Article or Project

The Basic Steps for Kilns with Kiln-Sitter

More Details

1. Place cone in sitter
2. Load Kiln
3. Lower lid, propping open 3-4 inches
4. Set timer for ½ hour more than estimated firing time
5. Turn controls to low for an hour to ninety minutes
6. Turn controls to medium for an hour to ninety minutes
7. Close lid completely
8. Plug one or more peep holes (Leaving one open)
9. Verify timer has ½ hour more time than estimated
10. Allow kiln to cool completely before opening
11. Examine cone after unloading the kiln
12. Examine time remaining on timer
13. Charting is a great idea

Related Steps:

How to Set Your Cone
Loading your kiln
Firing Glazes
Firing Overglazes


Article/Project Pictures:

This article currently has 0 pictures.

Contact us about this Article Tell a Friend about this Article Printer Friendly Version

Jump to Category:

Other Articles in this Category:

About Kilns Firing Glazes Kiln Repair – Kiln sitter AKA Cone Sitter Kiln Repair - Elements Part 2 (Step by Step) Loading your kiln